- Model: DAAO6615
- Height: 2410mm
- Material: 304 / 316L stainless steel
- Tube wall thickness: 2.5/3mm
- Working pressure: 0.2MPa-0.6MPa
- Working environment temperature: 0 ℃ -55 ℃
- Water inlet size: NPT 1 1/4 ”
- Drain size: NPT 1 1/4 ”
- Eyewash flow: ≥11.4L / min
- Body flow: ≥75,7L / min
- Main functions: eye wash / flush, automatic emptying, antifreeze
- Standard: ANSIZ 358.1: 2014, EN15154.1 / 2: 2006
The antifreeze-type composite eyewash can use the combination of a valve at the bottom, an automatic reset device, and use gravity to automatically drain water from the pipe after use, thereby avoiding icing in the pipe when the ambient temperature is below zero degrees. which suitable for cold areas where the temperature is below freezing in winter.
Shower Head
Based on the American standard requirements and our unique design, one time stamping molding shower head have total 94 holes and the edge is half hole which can create the perfect water spay area.
-One time stamping molding
-ABS plastic combine with seamless 304 stainless steel and 3 layers filter
-Flag handle: bright yellow. Easy to recognize from far distance.
Pipe &Pull Rod
Good quality 304 stainless steel tube content with more than 8% nickel. Both inside and outside is finished with fine polishing.
Capable of Self-standing and have 4 bolts for extra fix needed
Auto emptying the water in the pipe after use
Protect the pipe from freeze in the winter and prevent the potential water deterioration
Material Carbon steel + ABS coating.
Non-slip design for the foot pedal
Packing
Wrap with bubble film and packing into the fumigation free wooden crate
